- THIẾT BỊ PHUN SƠN
- THIẾT BỊ PHUN CÁT
- THIẾT BỊ ĐO ELCOMETER - KIỂM TRA LỚP PHỦ
- THIẾT BỊ ĐO ELCOMETER - THIẾT BỊ CHO PHÒNG THÍ NGHIỆM
- THIẾT BỊ ĐO ELCOMETER - THIẾT BỊ KIỂM TRA BÊN NGOÀI
- THIẾT BỊ ĐO ELCOMETER - KIỂM TRA BÊ TÔNG
- DỤNG CỤ GIA CÔNG THÉP
- DỤNG CỤ CẦM TAY
- THIẾT BỊ KHÁC
- HỆ THỐNG NHÀ PHUN
- DỊCH VỤ SỮA CHỮA
- ĐÈN MAGLITE
With a choice of calibration options and measurement modes, the MTG4 is ideal for taking readings on a wide range of coated and uncoated materials.
As well as all the features of the MTG2, the MTG4 has two calibration options. Using an uncoated sample of test material of a known thickness, the gauge can be calibrated using 1-Point calibration. Alternatively, the user can select one of 39 pre-set materials stored within the gauge including; aluminium, steel, stainless steel, cast iron, plexiglass, PVC, polystyrene and polyurethane.
Measurement Mode
Echo-Echo ThruPaint™ (E-E) measurement mode enables readings to be taken on coated materials with a thickness range up to 20.00mm (0.787”). In Echo-Echo ThruPaint™ mode, the coating thickness is ignored and the material thickness from the top surface of the material to the material density boundary is displayed.
Data Output
Compatible with ElcoMaster® software, individual readings can be downloaded via USB to PC or similar device for further analysis.
Features:
|
Technical Specification
Part Number (with Transducer)1 |
MTG4-TXC |
|||
Part Number (gauge only) |
MTG4 |
|||
Easy to use menu structure in multiple languages |
■ | |||
Tough, impact, waterproof and dust resistant equivalent to IP54 |
■ | |||
Bright colour screen with permanent backlight |
■ | |||
Ambient light sensor, with adjustable brightness |
■ | |||
Scratch and solvent resistant display; 2.4" (6cm) TFT |
■ | |||
Large positive feedback buttons |
■ | |||
USB power supply via PC |
■ | |||
Gauge software updates2 via ElcoMaster® Software |
■ | |||
2 year gauge warranty3 |
■ | |||
Measurement Rate |
4Hz | |||
Measurement Mode |
Range4 | Accuracy5 | ||
Pulsed Echo (P-E) |
0.63-500mm (0.025-20") |
±0.1mm (0.63-19.99mm) ±0.5% (20.00-500.00mm) |
±0.004" (0.025-0.787") ±0.5% (0.788-20.00") |
■ |
Echo-Echo ThruPaintTM (E-E) |
2.54-20.00mm (0.100-0.787") |
±0.1mm (2.54-20.00mm) | ±0.004" (0.100-0.787") | ■ |
Measurement Units |
mm or inches | |||
Repeatability / Stability Indicator |
■ | |||
Display Mode |
Reading | |||
Selectable Reading Resolution | Lo; 0.1mm, 0.01 Inch, 10m/s, or 0.001 in/μs | |||
Calibration Options |
|
|||
Zero (using the integral zero disc) |
■ |
|||
1 - point |
■ |
|||
Material selection; 39 preset materials |
■ |
|||
Factory; resets to the factory calibration |
■ |
|||
Data Output |
USB to PC | |||
Transducer Probe Type |
Dual Element |
|||
Auto transducer recognition |
■ | |||
Auto V-path correction |
■ | |||
Battery Type6 |
2 x AA | |||
Battery Life6 |
Alkaline : 15 hours Lithium: 28 hours |
|||
Operating Temperature |
-10 to 50°C (14 to 122°F) |
|||
Size (w x h x d) |
145 x 73 x 37mm (5.7 x 2.84 x 1.46") |
|||
Gauge Weight (including batteries) |
210g (7.4oz) |
|||
Packing List |
|
Elcometer MTG4, 5MHz 1/4" right angle transducer, couplant, wrist harness, screen protector, protective case, 2 x AA batteries, calibration certificate, operating instructions |
STANDARDS:
ASTM E797, EN 14127, EN15317
1 5MHz 1/4" right angle transducer supplied
2 Internet connection required
3 The Elcometer MTG range is extendable within 60 days from date of purchase, free of charge to two years
4 Dependent on the material being measured and the transducer being used
5 On steel
6 Supplied with Alkaline, Lithium and rechargable can be used with the gauges, continuous use at 1 reading per second
Transducers
MTG Transducers |
|
The MTG Transducer range has intelligent automatic transducer recognition ensuring correct probe identification even when the transducer is changed. |
|
|
|
|
|
Suitable for measuring |
Suitable for |
||||||||
Part Number |
Probe Diameter |
Probe Characteristic |
Damping |
ThruPaint™ |
Cast Iron |
Plastics |
Thin Plastics |
Fibreglass |
Thin Fibreglass |
Steel |
Glass |
Aluminium |
Titanium |
MTG4 MTG6 MTG8 |
1.00 MHz Dual Element Thickness Transducer |
||||||||||||||
TXC1M00EP-2 |
1/2" |
Right Angle |
S |
■ |
■ |
■ |
|
■ |
||||||
2.25 MHz Dual Element Thickness Transducer |
||||||||||||||
TXC2M25CP-2 |
Sản phẩm liên quan
Tin tức
Liên kết website
|