Thông tin sản phẩm

Bộ kit kiểm tra trong môi trường cháy nổ

Mã SP: Giá: Liên hệ

Hãng: Elcometer- Anh Quốc

The Elcometer Hazardous Area Inspection Kit is a protective coating inspection kit suitable for use in hazardous areas where electronic equipment is prohibited.

The kit provides all the tools required for the on-site inspection of a coating, including surface profile, dewpoint, relative humidity, both wet and dry film thickness and also adhesive testing.

Measurement parameters include:

Surface inspection
Surface profile
Surface contamination
Climatic conditions
Coating thickness
Adhesion

The products contained in this kit are not tested and approved for use in Hazardous Areas. Site Management should be consulted before this kit is used.

Kit Contents
Model	Description
Elcometer 128	Pictorial Standards	More Information
Elcometer 125	Surface Comparator, Grit	More Information
Elcometer 125	Surface Comparator, Shot	More Information
Elcometer 122	Testex Tape, Coarse	More Information
Elcometer 122	Testex Tape, Extra Coarse	More Information
Elcometer 124	Testex Dial Thickness Gauge	More Information
Elcometer 131/1C	Telescopic Inspection Mirror	More Information
Elcometer 134	Chlor*Test Surface Testing Kit	More Information
Elcometer 113	Magnetic Thermometer °C (°F)	More Information
Elcometer 116	Whirling Hygrometer °C (Metric), Sling Hygrometer °F (Imperial)	More Information
Elcometer 114	Dewpoint Calculator	More Information
Elcometer 112	Hexagonal Wet Film Comb: 25 -3000µm (1 - 120mils)	More Information
Elcometer 211	Thickness Gauge	More Information
Elcometer 107	Cross Hatch Full Kit - ISO (ASTM) Tape, Brush & Eye Glass	More Information

Technical Specification

Part Number		Description
Metric	Imperial
YKIT-HAZARD-1M	YKIT-HAZARD-1E	Elcometer Hazardous Area Inspection Kit
Dimensions		495 x 420 x 175mm (19.49 x 16.54 x 6.89”)

Standards:

AS 1580.408.4, AS 2331.1.3, AS 3894.3-A, AS 3894.5, AS 3894.9, AS/NZS 1580.107.3, AS/NZS 1580.108.1, ASTM B 499, ASTM D 2200,
ASTM D 3359-B, ASTM D 4414-A, ASTM D 4417-A, ASTM D 4417-C, ASTM G 12, BS 3900-C5-6A, BS 3900-C5-7B, BS 3900-E6, BS 5411-11,
BS 7079-C5, DIN 50981, ECCA T6, EN 13523-6, IMO MSC.215(82), IMO MSC.244(83), ISO 16276-2, ISO 2178, ISO 2409, ISO 2808-1A,
ISO 2808-6A, ISO 2808-7A, ISO 2808-7B, ISO 8501-1, ISO 8503-1, ISO 8502-5, ISO 8503-2, ISO 8503-5, JIS K 5600-1-7, JIS K 5600-5-6,
NACE RP0287, NF T30-038, NF T 30-124, NF T30-125, SS 55900, SSPC Guide 15, SSPC-PA2, SSPC VIS 1, SSPC VIS 2, SSPC VIS 3,
SSPC VIS 4, SSPC VIS 5, US Navy NSI 009-32, US Navy PPI 63101-000