- THIẾT BỊ PHUN SƠN
- THIẾT BỊ PHUN CÁT
- THIẾT BỊ ĐO ELCOMETER - KIỂM TRA LỚP PHỦ
- THIẾT BỊ ĐO ELCOMETER - THIẾT BỊ CHO PHÒNG THÍ NGHIỆM
- THIẾT BỊ ĐO ELCOMETER - THIẾT BỊ KIỂM TRA BÊN NGOÀI
- THIẾT BỊ ĐO ELCOMETER - KIỂM TRA BÊ TÔNG
- DỤNG CỤ GIA CÔNG THÉP
- DỤNG CỤ CẦM TAY
- THIẾT BỊ KHÁC
- HỆ THỐNG NHÀ PHUN
- DỊCH VỤ SỮA CHỮA
- ĐÈN MAGLITE
Measuring a coating’s hardness using the indentation method, the Elcometer 3095 Buchholz Hardness Tester consists of a bevelled disc indenting tool which is fitted into a stainless steel block exerting a constant test load of 500g (17.6oz).
The gauge is placed on to the coating and then removed after 30 seconds. The length of any subsequent indentation in the coating is measured using the graduated microscope.
The result is expressed as units of Buchholz Indentation Resistance using the scale provided.
Measure of Buchholz Hardness |
||||||
Indentation Depth | Indentation Resistance | Indentation Depth | Minimum coating thickness for which a measurement is valid | |||
µm | mm | µm | mils | µm | mils | |
20 | 0.8 | 125 | 5 | 0.2 | 15 | 0.59 |
21 | 0.85 | 118 | 6 | 0.24 | 20 | 0.79 |
23 |
0.9 |
111 | 7 | 0.28 | 20 | 0.79 |
24 | 0.95 | 105 | 7 | 0.28 | 20 | 0.79 |
25 | 1.0 | 100 | 8 | 0.31 | 20 | 0.79 |
38 | 1.05 | 95 | 9 | 0.35 | 20 | 0.79 |
28 | 1.1 | 91 | 10 | 0.39 | 20 | 0.79 |
29 | 1.15 | 87 | 11 | 0.43 | 25 | 1 |
30 | 1.2 | 83 | 12 | 0.47 | 25 | 1 |
33 | 1.3 | 77 | 14 | 0.55 | 25 | 1 |
35 | 1.4 | 71 | 16 | 0.63 | 30 | 1.18 |
38 | 1.5 | 67 | 18 | 0.71 | 30 | 1.18 |
41 | 1.6 | 63 | 21 | 0.83 | 35 | 1.38 |
43 | 1.7 | 59 | 24 | 0.94 | 35 | 1.38 |
Technical Specification
Part Number | Description | Certificate |
K0003095M001 | Elcometer 3095 Buchholz Hardness Tester | ο |
Dimensions | 360 x 310 x 120mm (14.2 x 12.2 x 4.7") | |
Weight | 2.9kg (6.4lb) | |
Packing List | Elcometer 3095 Buchholz Hardness Tester, indentation tool with bevelled disc and two locating pins, pin adjusting shim, x20 illuminated microscope, indentation locator template, hexagonal wrench, plastic carry case and operation instructions. |
STANDARDS:
BS 3900-E9, DIN 53153, ISO 2815, NF T30-052
Standards in grey have been superseded but are still recognised in some industries.
ο Optional Calibration Certificate available
Accessories
KT003095P001 | Spare Pin Supports (x2) |
KT003095P002 | Bevelled Hardened Steel Disc Indenter |