Thông tin sản phẩm

Máy thử độ cứng Persoz Elcometer 3045

Mã SP: K3045M001 Giá: Liên hệ

Hãng Sản Xuất: ELCOMETER - ANH QUỐC

The Elcometer 3045 Pendulum Hardness Tester provides reliable & repeatable measurements of coating hardness using either the Persoz or König pendulum testing method.

The Elcometer 3045 Persoz & König Pendulum Hardness Tester is equipped with a number of unique features designed to maximise repeatability and reproducibility of the pendulum hardness test method.

Using infrared technology, the Elcometer 3045 provides a fully automated Persoz or König pendulum hardness test with no human intervention ensuring accurate, repeatable results.

Simply fit the pendulum on to the loading pins, load the sample and close the door. The pendulum automatically moves to the start position, the sample table rises and the test begins.

The fully automated calibration procedure provides confidence in the test results. The Elcometer 3045 Persoz & König Pendulum Hardness Tester performs a full calibration routine using the glass calibration tile supplied; if the gauge is out of specification then, it automatically adjusts to meet the specified standard.

The Elcometer 3045 Persoz & König Pendulum Hardness Tester can be used in accordance with standards;
ASTM D 4366, BS 3900 E5, DIN 53157, ISO 1522, NF T30-016.

The sturdy and robust design provides a stable environment for tests ensuring repeatable and consistent coating hardness results. Compatible with ElcoMaster^® software, measurements of coating hardness can be transferred via PC for further analysis and report generation.

Introducing the Elcometer 3045 Persoz & König Pendulum
Hardness Tester

The hardness of a coating is measured by the number of oscillations within the specified limits of amplitude. There are two types of pendulum which can be used with the Elcometer 3045 Pendulum Hardness Tester – Persoz and König. The Persoz test measures the time taken for the amplitude of oscillations to decrease from 12° to 4°, and the König test measures the decrease from 6° to 3°. The softer the coating, the higher the dampening on the balls, the faster the reduction in amplitude of swing, therefore the less cycles of oscillation.

Key Features of the Elcometer 3045 Persoz & König Pendulum Hardness Tester

The Elcometer is a fully automated digital Pendulum Tester

Accurate, repeatable and reproducible coating hardness measurements
Sturdy, dustproof and robust design ensures consistent results
Fully automated test - position the sample, close the door and press start
Menu driven operation, in multiple languages
Batch memory stores all test data for output to a PC via the supplied ElcoMaster^® software
Rigid perspex door provides easy access for sample positioning
Automated calibration ensures pendulum operates precisely within specified limits
Adjustable feet and dual axis bubble-level indicator ensures test is accurate
Infrared optical measurement of oscillations
Internal storage for the calibration tile and pendulum

How to Set Up the Elcometer 3045 Persoz & König Pendulum Hardness Tester

From start to finish the Elcometer 3045 Persoz & König Pendulum Hardness Tester is a fully automated test, leaving no room for human error, therefore it is more reproducible than other pendulum hardness testers.

Once the sample and the pendulum are in position and the door closed, pressing the Start button:

Lifts the sample on to the balls of the selected pendulum
Moves the pendulum to the correct Start position
Automatically releases the pendulum, counting the number of oscillations until the movement has decayed and stores them into the batch memory
Returns the sample and pendulum to the start position ready for the next test in the set of three

Measuring Coating Hardness Using the Elcometer 3045 Persoz & König Pendulum Hardness Tester

Even though the arm slide wear plate can last up to 15,000 operations and the pin release wire can last up to 4,000 operations, the Elcometer 3045 comes with user serviceable components, allowing you to maintain the hardness tester in situ.

The Elcometer 3045 Persoz & König Pendulum Hardness Tester will even inform you when it’s time to check and replace these parts.

Create Instant Reports with ElcoMaster^®

It’s not just taking measurements but what you do with the collected data that matters. As inspectors can spend up to 30% of their working week producing reports, ElcoMaster^® saves time and money by producing professional bespoke reports in seconds.

The Elcometer 3045 Persoz & König Pendulum Hardness Tester has a batch memory that stores all test data for output to a PC via ElcoMaster^® Data Management Software.

* The Elcometer 3045 Pendulum Hardness Tester is supplied with a one year warranty against manufacturing defects , which can be extended to two years via www.elcometer.com

Technical Specification

Part Number	Description			Certificate
K3045M001	Elcometer 3045 Persoz & König Pendulum Hardness Tester			●
Pendulum	Persoz Pendulum*	König Pendulum*
Part Number	KT3045P001	KT3045P002		●
Oscillation Period	1 second ±0.01 seconds	1.4 seconds ±0.02 seconds
Measurement Deflection	12° to 4°	6° to 3°
Damping Time on Glass	430 seconds ±15 seconds	250 seconds ±10 seconds
Number of Oscillations	430 ±15 oscillations	172 to 185 oscillations
Maximum Specimen Panel Dimensions	200 x 110 x 14mm (7.85 x 4.33 x 0.55”)	Dimensions	500 x 330 x 760mm (19.7 x 13 x 29.9”)
Relative Humidity (%RH) Operating Range		Operating Temperature	5°C to 40°C (41°F to 104°F)
Relative Humidity (%RH) Operating Range		Instrument Weight	17kg (37.5lb)
Packing List	Elcometer 3045 Persoz & König Pendulum Tester, Glass Test Piece, Dual Axis Bubble Level, 20 x Glass Cleaning Wipes, Cleaning Cloth, 3 x Pin Release Wire, 2 x Arm Slide Wear Plate, Spare Fuse (315mA), Mains Leads: UK, EUR & US, RS232 Cable, ElcoMaster^® Software, Test Certificate, User Guide (please order Pendulum separately)
STANDARDS: ASTM D 4366, BS 3900 E5, DIN 53157, ISO 1522, NF T30-016 Standards in grey have been superseded but are still recognised in some industries.
Persoz & König Pendulums explained: The hardness of a coating is measured by the number of oscillations within the specified limits of amplitude. The Persoz test measures the time taken for the amplitude of oscillations to decrease from 12^o to 4^o, and the König test measures the decrease from 6^o to 3^o. So the softer the coating, the higher the dampening on the balls, the faster the reduction in amplitude of swing, therefore the less cycles of oscillation.
Certificate
	Persoz Pendulum Hardness Test Method Part Number: KT3045P001 Stainless Steel pendulum, weight 500g (17.6oz), fitted with 2 balls of 8mm (0.3”) diameter	Oscillation Period: 1 second, ±0.01 seconds Deflections: 12^o to 4^o Damping Time on Glass: 430 seconds ±15 seconds		●
	König Pendulum Hardness Test Method Part Number: KT3045P002 Stainless Steel pendulum, weight 200g (7.05oz), fitted with 2 balls of 5mm (0.2”) diameter	Oscillation Period: 1.4 seconds, ±0.02 seconds Deflections: 6^o to 3^o Damping Time on Glass: 250 seconds ±10 seconds		●

● Test certificate supplied as standard *Please order Pendulum separately

Accessories

Part Number	Description
KT3045P009	Glass Test Piece
KT3045P003	Dual Axis Bubble Level
KT3045P004	Arm Slide Wear Plate, Pack of 2
KT3045P005	Pin Release Wire, Pack of 3
KT3045P006	Glass Cleaning Wipes, Pack of 20