Thông tin sản phẩm

Chổi quét của máy đo khuyết tật lớp phủ, không hoạt động bằng điện.

Mã SP: Giá: Liên hệ

Hãng sản xuất Elcometer

Xuất xứ: Anh

Elcometer offers a wide range of high voltage detector probes and accessories to suit all applications and substrates.

Rolling springs and ‘C-type’ wire brushes are ideal for inspecting coatings on pipes and pipelines.

Each spring is supplied with an easy-release coupling piece, allowing users to quickly connect and disconnect the rolling spring from stanchions, pillars, etc.

Rolling springs are available in 2 versions, phosphor bronze round spring and 304 stainless steel box section spring. The 19mm (0.75”) diameter phosphor bronze springs are almost 3 times lighter than the 34mm (1.33”) diameter stainless steel springs.

Grounding mats are ideal for testing on ungrounded pipes. The conductive rubber mat is wrapped around the coated pipe and connected to both the grounding pin (supplied separately) and the signal return lead.

Part Number	Description		Compatible with Elcometer
			236	266	280

Telescopic Probes, Probe Extension Rods
	T23622790-1	Telescopic probe handle, 0.6 - 1.20m (24 - 47")	□
	T23622790-2	Telescopic probe handle, 1.8 - 3.60m (71 - 142")	□
	T99919988-3	Probe extension piece, 250mm (9.8")	□	■	■
	T99919988-1	Probe extension piece, 500mm (20")	□	■	■
	T99919988-2	Probe extension piece, 1000mm (39")	□	■	■
Accessory Adaptors, allowing other manufacturer’s accessories to fit Elcometer models
	T99920084	Adaptor for models: AP, APS, AP/S1, AP/S2, AP/W, 10/20, 14/20,10, 20 & 20S	□	■	■
	T99920083	Adaptor for models: P20, P40, P60, 780, 785 & 790	□	■	■
	T99920252	Adaptor for models: PHD 1-20 & PHD 2-40	□	■	■
	T99922747	Adaptor for models: 4S, 4.0, 8.0, 35	□	■	■
	T99920082	Adaptor for current range to fit old accessories	■	■	■
	T99922768	Adaptor for Elcometer 136 and older 236 models	■
Band Brush Probes
	T99919975	Band brush probe	□	■	■
	T99922751	Phosphor bronze brush probe	□	■	■
	□ Older Elcometer 236 models may require adaptor piece T99922768