Thông tin sản phẩm

Dụng cụ kiểm tra độ bám dính cơ Elcometer 106

Mã SP: F106 ---- 5 Giá: Liên hệ

Hãng Sản Xuất: ELCOMETER - ANH QUỐC

The Elcometer 106 Adhesion Tester is easy to operate and fully portable Type II adhesion gauge which provides a numerical value for adhesion strength.

Applications for the Elcometer 106 Adhesion Test include paint or plasma spray on bridge decking, coatings on steel, aluminium, concrete etc.

Supplied in a carry case - ideal for site tests
Hand operated - no need for a power supply
Includes a cutter for EN13144 and ISO 4624 tests

Adhesion Test Method

A test dolly is bonded to the coating using an adhesive. The Elcometer 106 adhesion tester houses a spring arrangement which applies a lift force to the dolly as the tension is increased.

When the coating is pulled off the surface, an indicator on the scale shows the numerical value of adhesion strength expressed in terms of the force per unit area required to remove the dolly.

Inspection of the dolly face is required to determine the failure mode.

To increase sensitivity at low values or for uneven surfaces, a 40mm (1.52”) dolly is available. When using the 40mm (1.52”) dolly, divide the scale reading by 4.

Technical Specification

Part Number	Description	Range
		MPa (N/mm²⁾	kg/cm²	psi	Certificate
F106----5	Elcometer 106 Adhesion Tester - Scale 5	0 - 0.2	0 - 2	0 - 30	ο
F106----1	Elcometer 106 Adhesion Tester - Scale 1	0 - 3.5	0 - 35	0 - 500	ο
F106----2	Elcometer 106 Adhesion Tester - Scale 2	0 - 7.0	0 - 70	0 - 1000	ο
F106----3	Elcometer 106 Adhesion Tester - Scale 3	0 - 15	0 - 150	0 - 2000	ο
F106----4	Elcometer 106 Adhesion Tester - Scale 4	0 -22	0 - 220	0 - 3200	ο
Dimensions	Scales 1, 2, 5: 152 x 76mm (6 x 3”) Scales 3 and 4: 150mm
Dolly Diameter	20mm (0.76”)
Dolly Area	314mm² (0.49 sq inch)
Gross weight of Kit	Scale 1, 2 and 5: 2.8kg (6.2lb) Scale 3: 4.2kg (9.3lb) Scale 4: 4.5kg (9.9lb)
Packing List	Elcometer 106 Pull-Off Adhesion Tester, pack of 20 dollies, Araldite adhesive, base support ring, magnetic dolly clamp, dolly cutter, ratchet spanner (scale 3 & 4 only), carry case and operating instructions

STANDARDS:
AS 1580.408.5, ASTM D 4541, AS/NZS 1580.408.5, EN 13144, EN 24624, ISO 4624, ISO 16276-1, JIS K 5600-5-7, NF T30-062, NF T30-606

Standards in grey have been superseded but are still recognised in some industries.

ο Optional Calibration Certificate available

Accessories

T1062895-10	Spare Dollies 20mm (0.76”) Diameter (Pack of 10)
T1062895-	Spare Dollies 20mm (0.76”) Diameter (Pack of 100)
T1062914-	Large Dollies 40mm (1.52 Diameter (Pack of 5)
T1062915-	Large Base Ring for 40mm (1.52")Dollies
T99912906	Araldite Standard Two Part Epoxy Adhesive, 2 x 15ml Tubes
T99914009	20mm (0.76") Dolly Cutter