Thông tin sản phẩm

Dụng cụ thử độ cứng Sclerometer Elcometer 3092

Mã SP: K0003092M201 Giá: Liên hệ

Hãng Sản Xuất: ELCOMETER - ANH QUỐC

The Elcometer 3092 Sclerometer Hardness Tester measures the hardness of a coating by moving a Tungsten Carbide Tip over the coating with predetermined force.

The body of the hardness testing instrument contains a cursor fitted with a screw lock and a round tip, compressed by one of the four springs corresponding to the four printed scales:

Grey spring: 0-3N (0.671lbF)
Red spring: 0-10N (2.248lbF)
Blue spring: 0-20N (4.49lbF)
Green spring: 0-30N (6.74lbF)

The spring force can be set by the “collar”; compressing the spring increases the force with which the tip is pushed on to the surface of the test piece.

By making short, straight movements while gradually increasing the load, the user can observe the force at which the tip leaves a mark or destroys the coating.

Each Elcometer 3092 Sclerometer Hardness Tester is supplied in a case with a 0.75mm (0.03”) diameter tungsten carbide tip and 3 springs (grey, red and blue). An optional green spring of 0 - 30N is also available.

Technical Specification

Part Number	Description
K0003092M201	Elcometer 3092 Sclerometer Hardness Testers - 3 ranges
Dimensions	165 x 24 x 16mm (6.5 x 1 x 0.6”)
Weight	370g (13oz)
Packing List	Elcometer 3092 Sclerometer, tool with 0.75mm (0.03”) diameter tungsten carbide tip, 3 springs (grey, red and blue), carry case and operating instructions

STANDARDS:
AS 3894.4, EN 438-2, ISO 4586-2

Accessories

KT003092P001	0.5mm (0.02”) Tungsten Carbide Tip
KT003092P002	0.75mm (0.03”) Tungsten Carbide Tip
KT003092P003	1.0mm (0.04”) Tungsten Carbide Tip
KT003092P008	90° Diamond Point Cone, 90µm (3.54mils) Radius - ISO Type
KT003092P004	Grey Spring 0 - 3N (0 - 0.67lbF)
KT003092P005	Red Spring 0 - 10N (0 - 2.248lbF)
KT003092P006	Blue Spring 0 - 20N (0 - 4.49lbF)
KT003092P007	Green Spring 0 - 30N (0 - 6.74lbF)