Thông tin sản phẩm
The Elcometer 500 Coating Thickness Gauge accurately measures the thickness of coatings on concrete and other similar substrates* - non destructively.
Fast and accurate, the Elcometer 500 Coating Thickness Gauge takes repeatable and reproducible dry film thickness measurements of coatings on concrete up to 10mm‡ thick – without damaging the coating.
Taking over 60 readings per minute in standard mode and 140+ readings per minute in scan mode; the
Elcometer 500 Coating Thickness Gauge allows users to inspect more coatings in less time. With a choice of intelligent, ergonomic probes, designed for continuous use and field replaceable probe tips you can inspect all day, everyday.
The built in signal strength indicator on the Elcometer 500 Coatings on Concrete Gauge prevents false or incorrect readings, as the gauge only displays the coating thickness measurement if the signal strength indicator goes green.
Robust, ergonomic and sealed against dirt and water, equivalent to a rating of IP54, the Elcometer 500 Concrete Coating Thickness Gauge has been designed to work in harsh environments.
Incredibly easy to use, the Elcometer 500 Coating Thickness Gauge for concrete can be used in accordance with ASTM D6132, SSPC PA9 & ISO 2808 Method 10.
Compatible with ElcoMaster® software and ElcoMaster® Mobile App, individual coating thickness measurements can be transferred via USB or Bluetooth® to PC or a mobile device for analysis and instant report generation.
How to Measure Coatings on Concrete using the Elcometer 500 Coating Thickness Gauge:
The Elcometer 500 Coating Thickness Gauge can also measure film thickness on substrates including plasterboard, drywall, concrete block, brick etc. without damaging the coating.
The coating material library feature simplifies the coating inspection process; there is no need to set up gates, range values or known thickness of the coating. Just select the coating material from the gauge library and start measuring.
Key Features of the Elcometer 500 Coating Thickness Gauge:
Fast
Measuring over 60 readings per minute in standard mode and over 140 readings per minute in scan mode, the Elcometer 500 coating thickness gauge can significantly reduce your inspection times.
Reliable
The Elcometer 500 will only display the coating thickness reading if the signal strength indicator turns green, preventing false or incorrect readings.
If the coating thickness is outside the measurement range, the
Elcometer 500 tells you on the display.
Intelligent
The Elcometer 500 measurement probes are supplied with user replaceable probe tips. If the tip is damaged or wears during use you can replace it and carry on.
The gauge even informs you when you need to change the probe tip, maximising inspection time.
Easy to Use
There is no need to set up gates, range values or know the thickness of the coating, simply select the coating material from the gauge library and start measuring.
Ergonomic
The Elcometer 500 gauge and intelligent probes have all been ergonomically designed for continuous use. No force is required to take a reading.
Rugged
Robust, ergonomic and sealed against dirt and water, equivalent to a rating of IP54, the Elcometer 500 has been designed to work in harsh environments, making it the ideal gauge for the laboratory or the job site.
Create Instant Reports with ElcoMaster
It’s not just taking measurements but what you do with the collected data that matters.
As inspectors can spend up to 30% of their working week producing reports, ElcoMaster® saves time and money by producing professional bespoke reports in seconds - even when out on site.
The Different Modes of Calibration:
The Elcometer 500's user calibration adjustment procedures are fully traceable to National and International Standards.
1. Coating Material Library
The Elcometer 500’s advanced measurement technology means that you no longer need to know how thick the coating should be before taking a reading, and you don’t need to set any measurement gates. Simply switch on the gauge, select the coating from the calibration library, and take a reading – it is that easy.
2. Material Thickness Calibration
To obtain the greatest measurement accuracy, the Elcometer 500 can be calibrated using the known thickness of the coating to be measured. If a sample of known thickness is not available, the Elcometer 500 Coating Calibration Mould (CCM) can be used to create a coating of known thickness which is traceable to both National and International Standards.
3. Sound Velocity Calibration
The Elcometer 500 can be calibrated by entering the speed of sound from the Product Datasheet available from the coating manufacturer.
How to Calibrate the Elcometer 500 Coating Thickness Gauge:
Incorporating state of the art ultrasonic measurement technology, each gauge can be calibrated in one of three ways - to a known thickness of the coating to be inspected; by setting the speed of sound of the coating; or by selecting the coating from a list of generic, or user defined coating materials.
Once the gauge has been calibrated, the
Elcometer 500 has a measurement accuracy of ±2%.
How to Create a Coating Thickness Sample for the Elcometer 500 using the Elcometer Coating Calibration Mould (CCM):
By using the Elcometer Coating Calibration Mould the Elcometer 500 calibration is traceable to national and international standards. The user defined coatings can be transferred into the Material Coatings Library within ElcoMaster® for use, at any time, on any Elcometer 500 gauge. Select the coatings from your list and transfer them to any Elcometer 500 gauge.
More information on how to use the Elcometer Coating Calibration Mould with the Elcometer 500 Coating Thickness Gauge can be found on the Accessories page.
* Similar substrates include plasterboard, drywall, concrete block, brick etc.
‡Epoxy coatings, thickness on other materials may vary
*Compatible with iPod, iPhone and iPad.
Elcometer 500 Model T: Made for iPhone 6 Plus, iPhone 6, iPhone 5s, iPhone 5c, iPhone 5, iPhone 4s, iPhone 4, iPad Air 2, iPad mini 3, iPad Air, iPad mini 2, iPad (3rd and 4th generation), iPad mini, iPad 2, and iPod touch (4th and 5th generation).
“Made for iPod,” “Made for iPhone,” and “Made for iPad” mean that an electronic accessory has been designed to connect specifically to iPod, iPhone, or iPad, respectively, and has been certified by the developer to meet Apple performance standards.
Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards. Please note that the use of this accessory with iPod, iPhone, or iPad may affect wireless performance.
iPad, iPhone, and iPod touch are trademarks of Apple Inc., registered in the U.S. and other countries. App Store is a trademark of Apple Inc., registered in the U.S. and other countries. Suitable for mobile devices running Android software version 2.1 and upwards. Android™and Google Play are trademarks of Google Inc. Elcometer and ElcoMaster are registered trademarks of Elcometer Limited. All other trademarks acknowledged.
| Technical Specification | ||
| Part Number | Description | Certificate |
| A500C-B | Elcometer 500 Coating Thickness Gauge Model B | ● |
| A500C-T | Elcometer 500 Coating Thickness Gauge Model T | ● |
| A500-KIT1 | Elcometer 500 Coatings on Concrete Inspection Kit | ● |
|
Operating Temperature |
-10 to 50°C (14 to 122°F) | |
| Power Supply |
2 x AA batteries (rechargable batteries can be used) |
|
| Battery Life | Alkaline: Approximately 15 hours Lithium: Approximately 28 hours | |
| Gauge weight | 161g (5.68oz) including batteries, without transducer | |
| Gauge Dimensions | 141 x 73 x 37mm (5.55 x 2.87 x 1.46”) without transducer | |
| Packing List |
Elcometer 500 Coating Thickness Gauge Model B & T Elcometer 500 Coating Thickness Gauge, 4ml (0.14fl oz) Bottle of Probe Tip Oil, 120ml (4fl oz) Bottle of Ultrasonic Couplant, 2 x AA Batteries, Protective Case, Transit Case (Model T), Wrist Harness, 3 x Screen Protector, ElcoMaster® Software (Model T), USB Cable (Model T), Test Certificate
Elcometer 500 Coatings on Concrete Inspection Kit Elcometer 500 Model T Coating Thickness Gauge, C1 & C2 coating thickness probes, C1 & C2 probe measurement foils: 1, 2, 3 & 8mm (40, 80, 120 & 310mils), Elcometer 456 Model B Ferrous Integral Gauge, Elcometer 456 calibration foils: 0.5 & 1.5mm (20 & 60mils), 2 x coating calibration moulds, 2 x Wrist Harness, 6 x Screen Protector, 120ml (4fl oz) bottle of ultrasonic couplant, 4ml (0.14fl oz) bottle of probe tip oil, transit case, ElcoMaster® software & USB cable |
|
|
STANDARDS:
|
||
| Probe Range | ||
| Scale C1 | T500-C1 Elcometer 500 Scale C1 Probe | Certificate |
 |
Range1: 150 - 2,500μm (6 - 98mils) Accuracy2: ±2% or ±10μm (±2% or ±0.4mil) |
● |
|
Resolution: Low: 10μm, 0.01mm, 1mil or 0.001” High: 1μm, 0.001mm, 0.1mil or 0.0001” |
||
| Scale C2 |
T500-C2 Elcometer 500 Scale C2 Probe |
Certificate |
 |
Range1: 750 - 9,000μm (30 - 355mils) Accuracy2: ±2% or ±10μm (±2% or ±0.4mil) | ● |
|
Resolution: Low: 10μm, 0.01mm, 1mil or 0.001” High: 1μm, 0.001mm, 0.1mil or 0.0001” |
||
1 Epoxy coatings, thickness on other materials may vary
2 Whichever is greater
● Test certificate supplied as standard
Accessories
|
Part Number |
Description |
|
| T50027602-1 | C1 Replacement Probe Tip; Pack of 2 |
|
|
T50027602-2 |
C2 Replacement Probe Tip; Pack of 2 |
|
| T50027604 | Probe Tip Oil; 4ml (0.14fl oz) Bottle | |
|
|
||
| T92015701 |
Ultrasonic Couplant; 120ml (4fl oz) |
|
|
T92024034-7 |
Ultrasonic Couplant; 300ml (10fl oz) | |
|
T92024034-8 |
Ultrasonic Couplant; 500ml (17fl oz) | |
| T92024034-3 | Ultrasonic Couplant; 3.8l (1 US Gallon) | |
| T92024034-9 | Ultrasonic Couplant (High Temp); 60ml (2fl oz); for use in high temperature environments up to 398°C (750°F) | |
 |
||
| T99022255-13 |
C1 Foil Set: 1 & 2mm (40 & 80mils) |
|
|
T99022255-13C |
C1 Foil Set - Certified: 1 & 2mm (40 & 80mils) | |
|
T99022255-14 |
C2 Foil Set: 3 & 8mm (120 & 310mils) | |
|
T99022255-14C |
C2 Foil Set - Certified: 3 & 8mm (120 & 310mils) | |
 |
||
| T50027567-1 | Elcometer 500 Coating Calibration Mould (CCM) |
.jpg)
Sản phẩm liên quan
-
Hãng Sản Xuất: Elcometer - Anh Quốc
Giá: Liên hệ -
Bộ poil cân chỉnh Scale2 (gồm25 um, 50um, 125um, 250um, 500um, 1000um, 2mm, 3mm )
Hãng sản xuất: Elcometer Uk
Giá: Liên hệ -
Hãng Sản Xuất: ELCOMETER - ANH QUỐC
Giá: Liên hệ -
Nhà sản xuất: ELCOMETERXuất xứ: Anh QuốcGiá: Liên hệ -
Hãng Sản Xuất: ELOMETER - ANH QUỐC
Giá: Liên hệ
Hỗ trợ trực tuyến
P.Kinh Doanh
0903 924 645
Định- admin
0898897783
THÔNG BÁO: Thêm địa chỉ mua sắm online đèn pin maglite cho khách hàng thêm lựa chọn
Hình ảnh Tiến Đức tại buổi Triển lãm Quốc Tế VietBuild 2016 (lần 2)
Tuyển nhân viên Sale Admin làm việc tại TP. Hồ Chí Minh
MIỄN PHÍ - Sửa chữa thiết bị phun sơn, phun cát 
Đèn maglite mini 1 pin AAA có hiệu suất chiếu sáng mạnh thế nào?