Thông tin sản phẩm

Thiết bị đo độ phủ bằng phương pháp phá huỷ (cắt lớp) Elcometer 121/4 (PIG)

Mã SP: A121 --- S Giá: Liên hệ

Hãng Sản Xuất: Elcometer - Anh Quốc

Available in two models, the Elcometer 121 Paint Inspection Gauge (P.I.G.) is designed to measure the paint thickness of single or multiple layers of coatings.

Both P.I.G. models are supplied with illuminated integrated graticule microscopes.

The Paint Inspection Gauge Top model has an internal carousel allowing each of the three cutters to be selected easily together with a cross hatch adhesion tester.

Compact and convenient, ideal for paint thickness measurement in confined areas
Made of anodised aluminium for durability
Bright LED light source for clear vision
Top Model can hold one cross hatch cutter & three standard cutters which are locked tight, a simple rotation of the cutter holder changes the cutting tool.

Technical Specification

	Description		Certificate
	Elcometer 121/4 Standard P.I.G.	Elcometer 121/4 Top P.I.G.
Part Number	A121---S	A121---T	ο
Range	2 - 2000µm (0.08 - 80mils) Accuracy is dependent on tool cut angle, half a division
Dimensions	Standard: 110 x 75 x 30mm (4.3 x 3 x 1.2”), 369g (13oz)	Top: 110 x 75 x 40mm (4.3 x 3 x 1.6 ), 383g (13.5oz)
Packing List	Elcometer 121/4, cutters 1, 4 and 6, x50 microscope, 4 x AG3 batteries for lamp (fitted), hexagonal wrench, black marker pen, wrist strap, carry case and operating instructions

STANDARDS:
Standard: AS1580.108.2, ASTM D 4138-A, BS 3900-C5-5B, DIN 50986, ISO 2808-5B, ISO 2808-6B, JIS K 5600-1-7, NF T30-123
Top: as above plus AS 1580.408.4, AS 3894.9, BS3900-E6, EN 13523-6, ECCA T6, ISO 16276-2, ISO 2409, NF T30-038

Standards in grey have been superseded but are still recognised in some industries

ο Optional Calibration Certificate available

Accessories

Part Number	Description	Angle	Measurement Range	Graticule Scale Factor	Certificate
T99915761-1	Tungsten Carbide Cutter No 1	45°	20 - 2000µm (1 - 80mils)	20µm (1mil)	ο
T99915761-4	Tungsten Carbide Cutter No 4	26.6°	10 - 1000µm (0.5 - 35mils)	10µm (0.5mil)	ο
T99915761-6	Tungsten Carbide Cutter No 6	5.7°	2 - 200µm (0.1 - 8mils)	2µm (0.1mil)	ο

Part Number	Description		Coating Thickness	Standard	Certificate
T99913700-1	X-Hatch Cutter, 6 teeth x 1mm		0 - 60µm (0 - 2.4mils)	ISO	ο
T99913700-2	X-Hatch Cutter, 11 teeth x 1mm		0 - 50µm (0 - 2.0mils)	ASTM	ο
T99913700-3	X-Hatch Cutter, 11 teeth x 1.5mm		0 - 60µm (0 - 2.4mils)	-	ο
T99913700-4	X-Hatch Cutter, 6 teeth x 2mm		50 - 125µm (2.0 - 5.0mils)	ASTM	ο
T99913700-4	X-Hatch Cutter, 6 teeth x 2mm		0 - 60µm (0 - 2.4mils)	ISO	ο
T99913700-4	X-Hatch Cutter, 6 teeth x 2mm		61 - 120µm (2.4 - 4.7mils)	ISO	ο
T99913700-5	X-Hatch Cutter, 6 teeth x 3mm		121 - 250µm (4.8 - 9.8mils)	ISO	ο
K0001539M001	Adhesion Tape (1 roll)			ASTM
T9998894-	Adhesion Tape (2 rolls)			ASTM
K0001539M002	Adhesion Tape (1 roll)			ISO
T9999358-	Adhesion Tape (2 rolls)			ISO