Thiết bị phun cát
Thông tin sản phẩm

Dụng cụ kiểm tra độ dày lớp phủ bằng cơ ( trái chuối) Elcometer 211

Mã SP: A211F - 1M Giá: Liên hệ

Hãng Sản Xuất: ELOMETER - ANH QUỐC

The Elcometer 211 Coating Thickness Gauge, commonly referred to as the “Banana Gauge”, is a Type I instrument designed to measure dry film thickness.

 

The Banana Gauge is ideal for use in environments where the use of electronic instruments is difficult, e.g. inflammable atmospheres in oil and gas production, and for underwater* dry film coating thickness inspection.

This is one of the most popular mechanical coating thickness gauges in the world.

  • Factory calibrated - with user calibration adjustment
  • Foils supplied to check calibration on site
  • Ideal for cold surfaces and underwater use
  • Small and portable with an accuracy ±5%
  • The “V” grooved base, ideal for pipeline inspection
  • Available in either Metric or Imperial versions, the Elcometer 211 measures coatings up to 6mm (250mils)

* Underwater use voids the warranty and users should replace the gauges periodically

 

Technical Specification

 
Part Number Description Range Certificate
A211F--1M Elcometer 211 Coating Thickness Gauge 0 - 1000µm ο
A211F--8M Elcometer 211 Coating Thickness Gauge 0.65 - 6mm ο
A211F--1E Elcometer 211 Coating Thickness Gauge 0 - 40mils ο
A211F--8E Elcometer 211 Coating Thickness Gauge 25 - 250mils ο
Accuracy ±5% of the reading or ±2.5µm/0.1mil (whichever is the greater)
Substrate Thickness 0.4mm (16mils) minimum
Measurement Area 30mm (1.18”) Diameter minimum
Measurement Diameter 20mm (0.8”) minimum
Edge Effects Must be at least 6mm (0.24”) from edge
Dimensions 200 x 60 x 30mm (7.8 x 2.4 x 1.2”)
Packing List Elcometer 211, calibration foil set, carry pouch, neck harness and operating instructions

 

STANDARDS:
AS 2331.1.3, AS 3894.3-A, ASTM G 12, ASTM B 499, AS/NZS 1580.108.1, BS 5411-11, BS 3900-C5-6A, DIN 50981, ISO 2178, 
ISO 2808-6A, ISO 2808-7A, JIS K 5600-1-7, NF T 30-124, SSPC-PA2


Standards in grey have been superseded but are still recognised in some industries

ο Optional Calibration Certificate available

 

Sản phẩm liên quan
Hỗ trợ trực tuyến
P.Kinh Doanh
0903 924 645
Định- admin
0898897783
Tin tức
Liên kết website
Đèn pin Maglite Thiết kê Website chuyên nghiệp